Whitaker Lab 159
This is a standard lecture room with movable seats. Lights are automatic.
Equipment Operation
- Turn on Power on TV.
- Insert tape into VCR that will automatically power up and start to play. If
there is no picture on the monitor Press the TV/Video button on the monitor
until you reach the TV setting (not Video 1 or Video 2). If you see ‘snow’
on the screen instead of a picture be sure the tape is rolling (numbers will
be changing in the VCR window below the tape slot) and press the channel up
or down button on the monitor until you reach channel 3.
- Press play, rewind, and fast forward on the VCR as needed.
- Adjust the volume on the monitor by pressing the volume up or down button.
- Eject tape, turn off VCR and monitor when done.
Common Problems:
- "TV" not selected on monitor. "Channel 3" not selected
on monitor. Also observed: Cable between TV and Monitor missing. AC wire between
VCR and wall missing.
Last updated:
Tuesday, 23-Dec-2008 02:07:28 EST
by Kathy Butler <
kmh2@lehigh.edu>