Drown Hall
Room 102a

Site Availability

This is a standard lecture room with two monitors and movable seats. Lights are on a timer next to the door. There is a pull down screen.

Equipment Operation

To use the TV/VCR system:

• Turn on Power on both TVs.
• Insert tape into VCR which will automatically power up and start to play.
• Press play if the deck does not auto-start.
• If there is no picture on the monitor Press the TV/Video button on the monitor until you reach the TV setting (not Video 1 or Video 2). If you see "snow" on the screen instead of a picture be sure the tape is rolling (numbers will be changing in the VCR window below the tape slot) and press the channel up or down button on the monitor until you reach channel 4.
• Press play, rewind, fast forward on the VCR as needed. Adjust the volume on the monitor by pressing the volume up or down button.
• Eject tape, turn off VCR and monitor when done.

Common Problems

• "TV" not selected on monitor.
• "Channel 4" not selected on monitor.
• Also seen: Cable between TV and Monitor missing. AC wire between VCR and wall missing.

TV: Panasonic CT2584
VCR: Panasonic AG1280

Problems

Contact the LTS Help Desk at x8HELP to report any hardware problems.