Chandler-Ullman
Room 315

Room Availability

This is a small seminar room with movable seats. Lights are on a timer. There is a pull down screen.

Equipment Operation:

• Turn on Power on TV
• Insert tape into VCR which will automatically power up and start to play.
• Press play if the deck does not auto-start. You may have to push a bit father than you might expect on this unit.
• If there is no picture on the monitor Press the TV/Video button on the monitor until you reach the TV setting (not Video 1 or Video 2).
• If you see "snow" on the screen instead of a picture be sure the tape is rolling (numbers will be changing in the VCR window below the tape slot) andpress the channel up or down button on the monitor until you reach channel 4.
• Press play, rewind, fast forward on the VCR as needed.
• Adjust the volume on the monitor by pressing the volume up or down button.
• Eject tape, turn off VCR and monitor when done.

Common Problems:

• "TV" not selected on monitor.
• "Channel 4" not selected on monitor.
• Also seen: Cable between TV and Monitor missing. AC wire between VCR and wall missing.

TV: Panasonic CT2584
VCR: Panasonic AG1290

Problems

Contact the Library and Technology Services Help Desk at x8HELP to report hardware problems.